This value A shows the outside temperature of the vehicle. Meanwhile, online 2003 Mitsubishi Eclipse Spyder Owners Manual allows you to access the publication in advantage. Also refer to the following pages on the anti-lock braking system, traction control function and skid control function. If this happens, adjust each locking pin D to a length that enables secure retention of the wind deflector. Insert the hood prop securely in the opening under the hood marked with an Unlatch the prop from the engine hood and put it back in its arrow.
Do not remove the wheel nuts yet. It was developed to help pre- vent death and serious injuries, to children who might become locked inside a vehicle trunk. If it does Turn the temperature control dial clockwise or counterclock- blink, have it checked at an authorized Mitsubishi Motors wise to the desired temperature. To install the bulb, perform the removal steps in reverse. Depress the tab A on the harness connector and pull the harness connector toward you to remove it. While the button is kept pressed, the disc will be fast-for- After pressing these buttons, reception of the selected station warded. See an authorized Mitsubishi Motors dealer when you replace a tire or wheel.
The cup holder is designed for holding cups or drink-cans securely in its holes. Pull the seat belt out slowly while holding the latch plate. To begin with, you will receive manual publications together with other book package after purchase. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice to find out the reason for uneven tread wear. Insert the bar D into the wheel nut wrench E. The indicator in the instrument cluster will illuminate while the front fog lights are on. On vehi- Mitsubishi Motors dealer or a repair facility of your cles that have an anti-lock braking system, be careful not choice and have the system checked as soon as possible.
See an authorized Mitsubishi Motors dealer as soon as possible to replace or repair the original tire. If the free play is not within these limits, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice for adjustment. Slowly move the emergency tool in the direction of the arrow to lock the tonneau panel. This will guarantee more reliable starting, and longer battery life. Incorrect towing equipment could damage your vehicle.
If the Mitsubishi mark is not facing you when you open the remote control transmitter case, the buttons may come out. See an authorized Mitsubishi Motors dealer as soon as possible to replace or repair the original tire. Keep one in a safe place as a spare key. Without obstructing traffic, stop the vehicle on a level, firm surface where you can work safely. Arm the system as The theft-alarm system is designed to provide protection from described below.
Return the emergency tool to its original position. As your vehicle is equipped with a tire pressure monitoring system, use only Mitsubishi genuine wheels. Latch the tether strap hook B of the child restraint sys- 9. Insert the stamped end of the emergency tool stamped 10. Technically, both options provide the same information linked to instructions, attributes, warnings, and several others. When all enrollment commands have been read out, the 4.
If it Manual seat is adjusted by a child, an unexpected accident might Pull the seat adjusting lever up and slide the seat forward or occur. To make long story short, this manual can help you know more about the automobile as well as comprehend how to work it the ideal way. To prevent the vehicle from rolling when it is raised on the The chocks shown in the illustration do not come with jack, place chocks or blocks A at the tire that is diago- your vehicle. For offline publication, certainly you have to bring it anywhere if you happen to encounter particular problem on the street. The inside of the battery is divided into several compart- ments.
A Genuine Mitsubishi oil filter is the best replace- ment filter. You could be injured if the vehicles move. The blower Never place anything over the sensor, since doing so will speed will gradually increase as the dial is turned to the right. Insert If you need to replace the fuel tank filler cap, use the nozzle in the tank port as far as it will go. Pull down both sun visors. Pull up on the shoulder portion of the belt belts in all other seating positions are equipped with an to take up any slack in the lap belt. Remove the light case mount- ing nut E.
Disconnect the harness connector by pulling the tab E in them counterclockwise. Return the sun visors to their original positions. Some people, or probably most of them, fail the instructions given in the manuals. This could cause it checked at an authorized Mitsubishi Motors dealer to overheat and be damaged. Remove the socket and bulb assembly B together by 3.